Welcome to our secret recruiting page! If you are viewing this page you must be a very special applicant! We are eager to interview you and learn more about you. But it is only fair you get to learn more about us too.
We believe in the Cinderella principle of recruiting. You are looking for the right fit. We are looking for the right fit. The best way to accomplish this is for us to be 100% transparent about our company, the position, and the ups and downs you will surely encounter.
Here is the hiring checklist of benefits, pay scale details, and conditions of employment that will be reviewed in the interview:
2024 Hiring Checklist Profile- Installer
FIELD SERVICE TECH TOOL LIST
The following schedule of tools shows what should be in your toolbox at various points during your first 3 months of apprenticeship training. But please don’t make any expensive tool purchases until after your 30 day review.
- Rubber Mallet
- Utility Knife
- Measuring Tape
- Speed Square
- Pry bar
- Needle nose pliers
- Complete set of Philips screwdrivers
-
- #1’s, #2’s, and #3’s
-
- Complete set of straight blade screwdrivers
- Complete set of nut drivers
-
- hand or impact ready
- Sizes range: 3/8″ to 1/2″
-
- Complete set of Allen wrenches
-
- standard and metric – hand and impact ready
- Standard size range: 1/16″ to 3/8″
- Metric size range: 1.5 to 10
-
- Wire cutters
- Wire Strippers
- Both #2 and #3 Philips tips and holders
- 4 ft fiberglass step ladder
- Cordless Drill
- Steel Carpenter Hammer
- Steel Ball Peen Dead Blow Hammer
- 4 ft Level
- Torpedo Level
- Large crowbar
- Set of channel lock pliers
- Standard pliers/dykes
- Set of vise grips
- Complete set of wrenches -standard and metric
-
- Combination of open ended and box preferred
- 3/8″ to 5/8″ size range plus 15/16″
-
- Set of crescent wrenches
-
- includes 6″ and 10″
-
- Ohm meter
- Complete drill bit set
-
- including step bits, countersink bits and standard drill bits
- size range 1/16″ to 1/2″
-
- Impact driver
-
- # 2 and # 3 tip
-
- Cordless drill with Hammer Function
- Caulking gun
- Airbag shims
- Chalk line
- Chisels
-
- 5/8″ masonry and wood
- multiple sizes preferred
-
- Center punch
- Complete set of sockets -standard and metric
-
- At least 3/8″ to 5/8″ and metric to equivalite
-
- Wire Crimping Pliers
- Pull chain
- Soldering iron
- 4 ½” Grinder
- File set
- Hammer drill
- Complete hole saw kit
-
- size range 3/4″ to 2″
-
- Miter saw
- Circular saw
- Sawzall
